High Reflective 600*600mm Aluminum Solar Traffic Sign Board
|Product name||High Reflective 600*600mm Aluminum Solar Traffic Sign Board|
|Battery||6AH li battery|
First, the characteristics of the Aluminum Solar Traffic Sign Board:
- TheAluminum Solar Traffic Sign Board standard box body is made of aviation aluminum type plate,
- and the box body is inlaid package. Our exclusive self-opening anti-hook type aviation aluminum
- profile frame is firmly packaged. The aluminum plate is tightly and seamlessly connected to the
- aluminum profile, which not only improves the aesthetics of the product, but also gives the product
- a full waterproof effect.
- Aluminum Solar Traffic Sign Board are all made with Taiwan wafer chips and our own molds, and
- For each lens is a convex lens. The convex lens has a light transmission function, which greatly
- increases the visible distance and not only has a longer service life. Very stable, with high refresh
- rate, high concentration, high brightness lamp features.
- The Aluminum Solar Traffic Sign Board adopts 3M integrated reflective film, which can produce
- strong reflective effect under the illumination of the light source, and its reflective brightness is 6
- times that of the traditional logo. In the daytime, its bright colors play an obvious warning role. At
- night or under low light, its bright reflective effect can effectively enhance people’s ability to recognize,
- see the target, and alert, thus avoiding accidents and reducing accidents. Casualties, reduced economic
- losses, and become an indispensable security guard for road traffic have obvious social benefits.
- Aluminum Solar Traffic Sign Board adopts 5W/18V monocrystalline silicon solar panel, which uses solar
- power to generate electricity, unparalleled cleanliness, high safety, relative broadness and sufficiency of
- energy, long life and maintenance-free. The quality of the product and the longevity of the product.
- There are two independent switches at the bottom of the Aluminum Solar Traffic Sign Board. Red is the
- power switch to control the power of the total product; black is the light control switch, which controls the
- solar energy switch.
- The back side of the Aluminum Solar Traffic Sign Board design is equipped with hoops for the upper and
- lower aluminum troughs. The galvanized plate hoops are easy to install, placed on the columns and wall,
- and are very convenient, firm and easy to disassemble.
For the safety of product installation, the upper and lower aluminum grooves of the product are solid rivets, and
no hollow rivets are used.
Second, the outline of the Aluminum Solar Traffic Sign Board:
The solar traffic sign is a kind of traffic sign. It consists of a sign surface, a sign bottom plate, a solar panel, a
controller, and a light-emitting unit (LED). It uses words and patterns to transmit warnings, prohibitions, and
instructions to drivers and pedestrians. To manage the safety of road traffic. It gives road users the exact road
traffic information to make the road safe and smooth.
Third, the principle and application of solar energy road mark
The working principle of the solar energy channel can be summarized as follows: the solar panel absorbs sunlight
during the day, converts the solar energy into electrical energy, and stores it in the energy storage device. At night,
the electrical energy in the energy storage device is automatically converted into light energy (it’s controlled by the
photoelectric switch) ), through the LED to emit light to outline the outline of the pattern, to convey traffic information.
Fourth, the installation method of Aluminum Solar Traffic Sign Board:
Solar panel installation:
- Connect the solar waterproof connector to the connector of the lamp.
- Tighten the waterproof nut in the wire.
- Put the sun board into the fixture,
- Finally, pass the screw through the hole of the solar panel, put the gasket on it, and then screw the nut.
Hoop installation method:
- Insert the M10 screws from the aluminum slot on the back of the product, and then insert the holes at the ends
- of the 76MM hoop into the screws at both ends, and then screw the nut.
- Fix the hoop in the middle of the aluminum trough and tighten the nuts at both ends.
we uses the Internet to create a brand new product sales model. Not only sell the products to customers, but also solve
all the problems of high-quality service and customers, and create the best quality new road brand manufacturer, which
is only convenient, fast and affordable for each cooperation.
Please fell free to contact with us
Email address :email@example.com
Wechat /Whatsapp: 008613530695664